EN 14885

Biocidal Activity Testing

  • Independent biocidal activity testings
  • Proof of efficacy for your product release
  • Accredited testing laboratory
Biocidal Activity Testing HygCen guarantees you to treat your data confidentially and to use it exclusively in the course of your request.
Which standards do you have to apply to in accordance with EN 14885?
Answer us 3 questions about your product, its claimed activity range and its field of application. Then find out which standards could be essential for your product according to EN 14885.
1
In which area should your preparation be used for disinfection or antisepsis?
2
For which application should your product be used in human medicine?
For which application should your product be used in veterinary medicine?
For which application should your product be used in food, industrial, domestic and institutional areas?
3
What activity should your product claim?
Results

According to EN 14885, no test is currently required or defined for the activity statement you have requested. If you nevertheless need the proof of activity, we will adapt existing standards for you. Call us or write us!

Standards in the field of human medicine

  • EN 12791, Surgical hand disinfection - Test method and requirements (phase 2, step 2)
  • EN 13623, Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems - Test method and requirements (phase 2, step 1)
  • EN 13624, Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1)
  • EN 13727, Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1)
  • EN 14348, Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)
  • EN 14476, Quantitative suspension test for the evaluation of virucidal activity in the medical area - Test method and requirements (phase 2, step 1)
  • EN 14561, Quantitative carrier test for the evaluation of bactericidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
  • EN 14562, Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2)
  • EN 14563, Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments in the medical area - Test method and requirements (phase 2, step 2)
  • EN 16615, Quantitative test method for the evaluation of bactericidal and yeasticidal activity on non-porous surfaces with mechanical action employing wipes in the medical area (4- field test). Test method and requirements (phase 2, step 2)
  • EN 16616, Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2)
  • EN 1499, Hygienic handwash - Test method and requirements (phase 2, step 2)
  • EN 1500, Hygienic handrub - Test method and requirements (phase 2, step 2)
  • EN 16777 Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area - test method and requirements - (phase 2, step 2)
  • EN 17111 Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - test method and requirements - (phase 2, step 2)
  • EN 17126 Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area - test method and requirements - (phase 2, step 1)

In food, industrial, domestic and institutional areas

  • EN 1276, Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
  • EN 1650, Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)
  • EN 13610, Quantitative suspension test for the evaluation of virucidal activity against bacteriophages of chemical disinfectants used in food and industrial areas - Test method and requirements (phase 2, step 1)
  • EN 13697, Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
  • EN 13704, Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1)

Veterinary medicine

  • EN 1656, Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area – Test method and requirements (phase 2, step 1)
  • EN 1657, Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
  • EN 14204, Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1)
  • EN 14349, Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
  • EN 14675, Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2, step 1)
  • EN 16437, Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary area on porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
  • EN 16438, Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in the veterinary area on non-porous surfaces without mechanical action - Test method and requirements (phase 2, step 2)
  • EN 17122 Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - test method and requirements - (phase 2, step 2)

Hygiene and Biocidal Activity Testings

Hygiene plays a special role in the areas of human and veterinary medicine. But also in the food industry and in special occasions in the domestic or public areas, it is important to work with low amounts of microorganisms. Because germs can generate serious illnesses and infections.

Chemical disinfectants prevent disease transmission by surfaces, instruments and other support materials. Antiseptics reduce microorganisms on body surfaces, wounds and tissues - in humans and animals. For each application, different disinfectants or antiseptics are suitable.

To enable users to choose the right product, they must be able to rely on efficacy data. At the same time many ingredients endanger humans, animals and the environment.

Therefore, strict and highly complex specifications apply. Some chemical disinfectants are biocidal products, others are medical devices. For example, surface and hand disinfectants meet both criteria. But no matter for which product, for which area of application and for which country - all regulations require efficacy tests according to specific specifications. These tests are intended to certify that the disinfectants and antiseptics act as indicated by the manufacturer. At the same time, they protect users and patients from possible damage to health. Reduce this risk as a manufacturer and perform your efficacy testings with HygCen.

Disinfections are intended to interrupt disease transmission. For this, the disinfectant used must irrevocably reduce existing pathogens. In principle, there are chemical, chemothermal and physical disinfection methods. The so-called "reduction factor" defines the value that describes the extent of the disinfecting activity. If a certain "microorganism reduction limit" is reached in the laboratory test, a product is considered to show activity. Laboratories give it as a decadal logarithm (lg). It describes how much a disinfectant reduces the number of testing organisms. Depending on the test method, the Ig is between ≥ Ig 2 and ≥ Ig 5, i. over 102 and 105 steps. The result of the disinfection is therefore always dependent on the initial load (bioburden) of the surface.

Biocides are literally substances that destroy life ("bios" = Greek "life", "caedere" = Latin "kill"). The active ingredients and preparations serve to destroy, kill or deter harmful organisms. They eliminate microorganisms or pests (such as woodworms, mice, etc.) chemically or biologically.


Approval process for biocides

Biocides are intended to protect food, building materials (e.g., wood) and other everyday items, and to provide adequate building hygiene. At the same time, their inherent properties endanger humans, animals and the environment (European Regulation (EU) No 528/2012). The current biocide regulation eases the free circulation of biocidal products in the EU. In parallel, the regulation increases the protection of the biosphere. The Biocidal Products Regulation invokes the precautionary principle. Possible dangers must therefore be excluded prior to marketing. All biocidal products are therefore subject to approval. The approval procedure is a two-stage process. First, the biocidal active substances are tested by means of European methods. If the authority approves the tested biocidal active substance, it will be included in the positive list. Only if all the biocidal active substances of a biocidal product are included in this "Union list" can the biocide be tested and approved as a whole. Disinfectants are one of four main groups in the Biocidal Regulation.

The HygCen testing laboratory tests your biocidal products and individual biocidal agents. So the market approval of your disinfectant is nothing in the way.


HygCen tests your chemical disinfectants and antiseptics

  • On microbiocidal activity

    HygCen tests whether your product shows activity against vegetative bacteria, bacterial & fungal spores, yeasts and viruses.
  • In accordance with all standards of EN 14885
    The overview standard specifies which European standards your product must meet in order to be considered microbicidal. If your agent passes all tests, it may be approved for the market.
  • For specific requirements

    Country-specific listings require individual testing procedures that differ from EN 14885. HygCen checks your product e.g. according to the specifications of the RKI listing, VAH listing and many more. Contact us!

Advantages of our activity testings

Overview standard EN 14885 – Chemical Disinfectants and Antiseptics

The EN 14885 standard empowers manufacturers, users and regulatory authorities to assess the activity of chemical disinfectants and antiseptics. The EU standard EN 14885 represents an overview standard. This is required by the highly complex regulation of such disinfecting agents. EN 14885 sets out numerous standards that set out test procedures and licensing requirements for these products. The European standard provides a good overview of the use of chemical disinfectants and antiseptics in all essential areas. This concerns products of human and veterinary medicine as well as those of the food and other industries. In addition, EN 14885 regulates tests of disinfectants for domestic or public use.


When is your disinfectant or antiseptics safe for product release in the EU?

Without independent testing, you will not receive market approval in Europe. The European authorities therefore require that an independent testing laboratory confirms the activity and safe use of your product. Regardless of whether your product should have bactericidal, yeasticidal, fungicidal, mycobactericidal, tuberculocidal or virucidal activity: it must be proven by two specific tests. On the one hand by the quantitative suspension test of phase 2, step 1. On the other hand by the quantitative microorganism carrier test of phase 2, step 2.

National requirements
Numerous national specifications and regulations supplement the European requirements. Nationwide use e.g. many medical facilities for preventive disinfection only preparations with VAH certificate. The Association for Applied Hygiene is a non-profit association that pays particular attention to standard compliant tests. For the VAH listing, a manufacturer must, among other things, produce two test reports, including two reports from two independent, accredited test institutes. After successful admission, the VAH listing will remain valid for three years. Following this, a recertification process must be performed to ensure that the product remains listed. All relevant tests and appraisals have in common that in addition to the European requirements, further requirements must be met.

We have undergone the necessary quality controls through our regular participation in the ring-trials organized by the VAH and can furthermore present an accreditation for the necessary standards. Through this logo we have been approved by the VAH to submit test reports which follow to a certification of products by the VAH.

The DVG (German Veterinary Society e.V.) lists three lists for users:

All products listed in the DVG list for animal husbandry are tested according to the EN test standards that are binding for the respective field of application. Only for the areas for which no Phase 2 / Stage 2 EN test standards have yet been established on porous microcarriers (e.g., efficacy against viruses and parasites) are the DVG guidelines specific to these areas applicable.

DVG-specific quality assurance criteria:

As an accredited testing laboratory, HygCen tests your chemical disinfectants and antiseptics in accordance with all known national and international guidelines and standards. EN 14885 regulates the tests and requirements for all relevant areas of application


HygCen tests your products for all applications according to EN 14885

We test preparations that are used in hospitals, municipal medical facilities or in the dental field.

  1. Hygienic hand disinfection or wash
  2. Surgical hand disinfection or wash
  3. Surface disinfection (with / without mechanical action)
  4. Instrument disinfection
  5. Textile disinfection
  6. Water treatment to control Legionella

 

The following standards are part of the standard EN 14885 in the medical area:

  • EN 13727
    Quantitative suspension test for the evaluation of bactericidal activity
  • EN 13624
    Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity
  • EN 14348
    Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants including instrument disinfectants
  • EN 14476
    Quantitative suspension test for the evaluation of virucidal activity
  • EN 17126
    Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants
  • EN 17387
    Quantitative test for the evaluation of bactericidal and yeasticidal and/or fungicidal activity of chemical disinfectants on non-porous surfaces without mechanical action
  • EN 14561
    Quantitative carrier test for the evaluation of bactericidal activity for instruments
  • EN 14562
    Quantitative carrier test for the evaluation of fungicidal or yeasticidal activity for instruments
  • EN 14563
    Quantitative carrier test for the evaluation of mycobactericidal or tuberculocidal activity of chemical disinfectants used for instruments
  • EN 16615
    Quantitative test method for the evaluation of bactericidal and yeasticidal activity on non-porous surfaces with mechanical action employing wipes (4-field test)
  • EN 16616
    Chemical-thermal textile disinfection
  • EN 17111
    Quantitative carrier test for the evaluation of virucidal activity for instruments
  • EN 16777
    Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants
  • EN 17272
    Methods of airborne room disinfection by automated process - Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities
  • EN 1500
    Hygienic handrub
  • EN 1499
    Hygienic handwash
  • EN 12791
    Surgical hand disinfection
  • prEN 17430
    Hygienic handrub virucidal
  • prEN 17846
    Quantitative test method for the evaluation of sporicidal activity against Clostridioides difficile on non-porous surfaces with mechanical action employing wipes (4-field test)

We evaluate active substances used in animal transport, production or body disposal.

  1. General Surface disinfection (with / without mechanical action)
  2. Teat disinfection
  3. Disinfection of equipment by immersion
  4. Hygienic hand disinfection or wash
  5. Surgical hand disinfection or wash

 

The following standards are part of the standard EN 14885 in the veterinary area:

  • EN 1656
    Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics
  • EN 1657
    Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics
  • EN 14204
    Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants and antiseptics
  • EN 14349
    Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used on non-porous surfaces without mechanical action
  • EN 14675
    Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics
  • EN 16437
    Quantitative surface test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used on porous surfaces without mechanical action
  • EN 16438
    Quantitative surface test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics on non-porous surfaces without mechanical action
  • EN 17122
    Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics
  • prEN 17422
    Quantitative surface test for the evaluation of teat disinfectants

We test chemical disinfectants and antiseptics for use in tourism & retail, manufacturing industry, office & household and public facilities (crib ...).

  1. Surface disinfection at low / high conditions
  2. Products for "cleaning in place" (CIP cleaning (cleaning in place))
  3. Hygienic hand wash and disinfection
  4. Wipes
  5. Products for use in breweries, the beverage industry and non-alcoholic beverages
  6. Products for use in dairies
  7. Products used in the manufacture of cosmetics
  8. Products used in manufacturing in the pharmaceutical industry

 

The following standards are part of the standard EN 14885 in the food, industrial, domestic and institutional areas:

  • EN 1276
    Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics
  • EN 1650
    Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics
  • EN 13697
    Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants
  • EN 13704
    Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants
  • prEN 17658
    Chemical textile disinfection for the domestic area

Overview of standards from EN 14885

The European overview standard applies to products which are to be active against the following microorganisms: vegetative bacteria (including Legionella and mycobacteria), yeasts, bacterial and fungal spores and viruses (including bacteriophages). In addition, EN 14885 also applies to active substances and disinfectants that are currently being developed or are not yet intended for a specific area of application. For each area of application, the tests must demonstrate different levels of reduction of the test organisms. Which standards according to EN 14885 could be relevant for your disinfectant or antiseptic, you will find in our next test.

How we test your chemical disinfectants and antiseptics

  1. Request an offer from us - by phone or by online request. Important for us to know: Which product would you like to test, which active substances does it contain and for which application area should it be used?
  2. You send us your chemical disinfectants or antiseptics as soon as you have accepted our offer.
  3. Once your product has arrived, we will initiate the commissioned assessment of your product according to the prescribed tests. We check in original condition - the way your product will be delivered and used in the future.
  4. We test according to all anchored standards in the European standard EN 14885 as well as other standards (RKI, VAH etc.). These tests are, in particular, quantitative suspension tests (phase 2, step 1) and quantitative laboratory studies (phase 2, step 2).
  5. You will receive a test report including an evaluation from us. Our scientific director assigns the results of the test report to you in this assessment.

Overview on the tests of Phase 1, Phase 2 / Step 1, Phase 2 / Step 2 and Phase 3

Phase 1 exams are not used for product claims. Historically, they have only served to differentiate disinfectants from non-disinfectants in general. The term "disinfectant" was previously not protected.

These tests are intended to confirm that a product has a bactericidal, fungicidal, yeasticidal, mycobactericidal, tuberculocidal, sporicidal or virucidal activity. Under simulated practical conditions (in particular conditions) that apply to its intended use. The activity of a disinfectant in the quantitative suspension test is generally tested as follows:

First, we define a base condition that simulates the normal soiling of a surface. These are brought into contact with your disinfectant together with a starting microorganism suspension (in a defined amount e.g. 108 CFU / ml). Then we wait for the specified contact time. Then we immediately stop the further effect of your active substance chemically with a neutralizing agent. Now we bring the mixture diluted to different extents on agar plates and it follows the incubation of the plates. After the microorganism-specific time for growth (e.g. 48h) we read the colony-forming units (CFU). Then we analyze the reduction of the initial amount of organisms. For a product to be classified as bactericidal, the decadic logarithm at ≥ lg 5 must be greater than 105. If your disinfectant does not reach this value, a higher concentration of the active substance or a longer contact time can possibly achieve the desired effect.

The tests should certify that a product has a bactericidal, fungicidal, yeasticidal, mycobactericidal, tuberculocidal, sporicidal or virucidal activity. Unlike Phase 2, Step 1, the product is applied to a surface or skin under simulated practical conditions (e.g, surface, instrument, handwashing and hand sanitizing).

Applicable procedures for this type of test are not yet available, but can be developed in the future..

Adapted And Optimized Test Setup

As part of the regulation of disinfectants and antiseptics, there are numerous other specifications and standards in addition to the standards already mentioned. HygCen tests your chemical disinfectants and antiseptics according to the specifications you desire. In most cases, it is better to test different requirements in parallel at the same time. Use HygCen to determine your optimum testing setup. Avoid expensive additional tests.

The abbreviation of the European Chemicals Ordinance derives from the English title "Regulation concerning the Registration, Evaluation, Authorization and Restriction of Chemicals". Its German title is the European Chemicals Regulation for the Registration, Evaluation, Authorization and Restriction of Chemical Substances. "Regulation (EC) No 1907/2006 requires that chemicals should in principle be manufactured and used in such a way that the negative consequences for humans, animals and the environment are as low as possible. For most of the chemicals used, there are still insufficient data available. Since 2007, the REACH guideline aims to change this situation. At the same time, the introduction of REACH has standardized the chemicals legislation throughout Europe. As a manufacturer, you must ensure that your chemical disinfectants meet the requirements of REACH. We are happy to test your active substances in accordance with the requirements of REACH.

ECHA is the European Chemicals Agency. It advocates the safe use of chemicals. The agency supports companies to comply with applicable laws. Worrying chemicals are under scrutiny. Thus, ECHA places the protection of humans, animals and the environment in the focus of their work. At the same time, the regulatory authority promotes the innovative capacity and profitability of companies in the chemical industry. ECHA sets the benchmarks that chemical disinfectants must meet under certain conditions to show activity. If you have further questions about ECHA, feel free to contact us!

CLP is Regulation (EC) No 1272/2008 on the classification, labeling and packaging of substances and mixtures.

The aim of the CLP (Regulation on Classification, Labeling and Packaging of Substances and Mixtures) is to ensure a high level of protection of human health and the environment. It also seeks to ensure the free movement of goods within the common internal transport of chemicals, mixtures and certain specific products. The CLP regulation is based on the so-called "Globally Harmonized System (GHS) of Classification and Labeling of Chemicals" of the United Nations (UN). The globally harmonized system aims to make the level of protection of human health and the environment more uniform, transparent and comparable. Our experts at HygCen know which specifications your product must observe in accordance with the CLP regulation. Contact us!

Whenever officially ordered disinfection measures are carried out, the RKI list must be used. The disinfectant list of the Robert Koch Institute ensures that the registered active substances and mixtures show activity. People should be protected from communicable diseases. Registered products are simultaneously classified by the Federal Environmental Agency (UBA) as harmless to health and the environment.

In order for the RKI to classify a product as showing activity, the disinfectant must be assessed by expert opinion according to prescribed methods and / or own investigations. The environmental impact assessment is based on the application concentration and the concentration of use of the disinfectant.

REQUEST
PHONE
FIND US

Send request.

* Required fields
HygCen guarantees you to treat your data confidentially and to use it exclusively in the course of your inquiry request.

Contact us now!

You can reach us under the following phone number:

+49 (0) 385 477 419 00

Call!

You are also welcome to visit us in Schwerin!

You can find us here:

HygCen Germany GmbH
Bornhövedstrasse 78
19055 Schwerin
Germany

Directions!